Blog

Passetti-660x330
0
Hunting for Medals with 3D Printing and Treed Filaments

Canoe and Surf: Two Italian athletes at the Paralympics and World Championships. Prostheses and guardians printed with TreeD Filaments materials by engineer Marco Avaro. Veronica Yoko Plebani went to the Paralympics in Rio. Fabrizio Passetti prepared for the World Championships in La Jolla, California. These are two Italian athletes who already have a rich collection of achievements and […]

Read More
EOSTATE MeltPool
0
EOS Answers Metal AM QC Issues with Successful Pilot for Process Monitoring Tool

EOS completed the pilot phase for EOSTATE MeltPool, a process monitoring and analysis solution for direct metal laser sintering (DMLS). Turkey-based pilot customer TUSAS Engine Ind. Inc. (TEI) will use the automated, intelligent and real-time process monitoring tool for quality inspection on engine parts. Serial production with industrial 3D printing systems aims for high-quality and reproducible component quality at the […]

Read More
Shining3D013
0
Shining 3D’s “Anything Factory” Opens Up to the World, from 3D Scanners to Metal AM

Sometimes it seems that companies in the west do a lot of talking about the future of manufacturing while companies in China just go ahead and do the things, any-thing, that everyone else is talking about. Shining 3D might just be one of those companies: while many spend most of their time discussing the limits […]

Read More
image006
0
3D Printed Racecar Heads to Birmingham’s Thinktank Readying for Le Mans 24 Hours

A 450bhp partially 3D printed racecar that competed in the 2015 24 Hours of Le Mans featuring a host of 3D printed parts will be on display at the Thinktank science museum in Birmingham from 28th July for six weeks. The car is a 300 km/h DOME S103 prototype that was fielded by British racing […]

Read More
P90226910-lowRes
0
Automotive 3D Printing Gets Real as Rolls Royce Phantom Integrates Over AM 10,000 Part (Including HP’s MJF)

BMW Group’s Additive Manufacturing Centre reported that 10,000 additively-manufactured parts have been integrated into series production of Rolls-Royce Phantom (Rolls Royce is part of BMW Group) to date. Furthermore, BMW says that new technologies for automotive 3D printing will shorten production times, including HP Multi-Jet Fusion technology, which was used for the first time in car […]

Read More
Concept_Laser_3Dprinted_satellite2
0
3D Printed Satellite Metal Component Built by Thales Alenia Space and Poly-Shape with Concept Laser AM Technology

Once again, the aerospace industry is driving forward innovation and acting as the spearhead for digital manufacturing. The most recent signal comes from Thales Alenia Space. Working in collaboration with the 3D printing service company Poly-Shape, the company 3D printed satellite parts for the new South Korean communications satellites Koreasat-5A and Koreasat-7. Koreasat-7 is set […]

Read More
3d printed tire mold
0
3D Printed Tire Molds by SLM Solutions Used to Manufacture Next Gen Tire Threads

The Selective Laser Melting technology (SLM®) by leading German metal 3D printer manufacturer SLM Solutions enables the production of new 3D printed tire tread mould segments in shorter time, less expensive and using three-dimensional geometries for prototype and mass production tools. Due to the layer by layer process using fine metal powder which is melted […]

Read More
fixer52
0
3D Printed Custom Bicycle Parts Produced by ExOne in a Fraction of the Time, Half the Cost

Large size binder jetting 3D printer manufacturer and service company ExOne teamed up with Finalnd based ideas2cycles engineers and designers to produce a topologically optimized set of steel 3D printed custom bicycle parts. The result is that the parts where not only more aesthetically pleasing lighter and efficient, but also that they were produced in on […]

Read More
Nervous System Porcelite 3D Printable Ceramics09
0
3D Printable Ceramics Material by Tethon3D Used by Nervous Systems to 3D Print a Cup on a Form2

Whenever someone asks about the state of low cost ceramics 3D printing the one company that comes inevitably to mind is Tethon3D, which has spent the past several years experimenting with its own 3D printable ceramics material, developed for legacy Zcorp binder jetting 3D printers (and usable on current 3D System’s Projet x60 series as […]

Read More
284a9c_multiple_parts_v2
0
Final Parts 3D Printed at Delphi Automotive with Carbon M1

Jerry , Delphi’s manager of additive manufacturing development, was first introduced to Carbon in April, 2015. A 31-year veteran at Delphi, Jerry has been working with additive manufacturing technologies for more than 20 years. His team’s day to day operations focus on prototyping a host of parts including electrical connectors, grommets and housings. Working with […]

Read More

The Business of 3D Printing is Evolving

Don't miss out on opportunities: enter your email to receive news,
updates and exclusive offers directly to your inbox

This information will never be shared with third parties