Home / 3D Modeling / Conformal Cooling, CAD/CAM Software and Direct Metal Printing Used to Overcome Injection Molding Challenges
bastech.jpg

Conformal Cooling, CAD/CAM Software and Direct Metal Printing Used to Overcome Injection Molding Challenges

Anyone familiar with injection molding knows that the cooling system design is critical to cycle times, which takes up 70% to 80% of the injection molding cycle. Traditional methods for cooling molds involve secondary machining operations to drill cooling channels that follow straight lines and don’t consistently keep temperatures uniform. A well-designed cooling system can shorten the molding time and improve productivity tremendously. Enter conformal cooling.

Attend the live webinar to hear how Bastech, an Ohio-based one-source solution provider for shop floor, additive manufacturing services and equipment sales, delivers benchmarking results that prove the advantages of conformal cooling with significant improvements in cost, productivity and quality.

Watch the video to get a sneak peek and join the webinar to get the details of how:

Mold design times can be reduced by as much as 75% and production man hours by almost 50%, through the integration of 3D Systems Cimatron™ CAD/CAM software, the ProX® DMP series of direct metal 3D printers and Geomagic® Control™ inspection software.
In the first benchmark test of a 3D printed conformal core versus a conventionally manufactured spiral baffle core, Bastech was able to maintain a consistently lower temperature throughout the run, reduce cycle times by 22% and cut costs by 18%.
In the second benchmark test, Bastech designed a cavity, core and slide of a mold for 3D printing to test the effects of cooling and cycle times, which yielded a 16% reduction in costs and a 14% decrease in the all-important cycle time.

Bastech-conformal-cooling-webinar-email-header

LIVE WEBINAR DETAILS:
DATE: Thursday, June 16, 2016

TIME: 8 AM PDT / 11 AM EDT (US)

DURATION: 1 hour

SPEAKERS:
Scott Green, Product Management, 3D Systems
Ben Staub, President, Bastech
Scott Young, Engineering Manager, Bastech

REGISTER

(even if you can’t make it, register anyway to get the recording and bonus whitepaper)

Don’t miss this opportunity to see how Bastech brings its expertise to the fore by combining Cimatron for mold design, the ProX DMP 200 for direct metal printing of tools and molds and Geomagic Control for inspection. Understand how advanced design and manufacturing can solve your injection mold cooling challenges while shortening cycle times, improving plastic part quality and reducing costs.

About 3D Printing Media Network

Check Also

static1-squarespace

Open Bionics Is Looking for a Senior Electronics Design Engineer

Job Title: Senior Electronics Design Engineer at Open Bionics Salary: £28k-£35k Equity: Negotiable, depending on …

Leave a Reply

Your email address will not be published. Required fields are marked *