Home / 3D Printing / US Navy Marks First Flight with 3D printed, Safety-Critical Parts
100617-N-3358S-042 
U.S. 5TH FLEET AREA OF RESPONSIBILITY (June 17, 2010) An MV-22B Osprey assigned to the Golden Eagles of Marine Medium Tiltrotor Squadron (VMM) 162 lands aboard the amphibious transport dock ship USS Mesa Verde (LPD 19). Mesa Verde is part of the Nassau Amphibious Ready Group supporting maritime security operations and theater security cooperation efforts. (U.S. Navy photo by Mass Communication Specialist 1st Class Steve Smith/Released)
100617-N-3358S-042 U.S. 5TH FLEET AREA OF RESPONSIBILITY (June 17, 2010) An MV-22B Osprey assigned to the Golden Eagles of Marine Medium Tiltrotor Squadron (VMM) 162 lands aboard the amphibious transport dock ship USS Mesa Verde (LPD 19). Mesa Verde is part of the Nassau Amphibious Ready Group supporting maritime security operations and theater security cooperation efforts. (U.S. Navy photo by Mass Communication Specialist 1st Class Steve Smith/Released)

US Navy Marks First Flight with 3D printed, Safety-Critical Parts

Naval Air Systems Command (NAVAIR), a division of the US Navy, marked its first successful flight demonstration of a flight critical aircraft component built using additive manufacturing (AM) techniques, July 29. An MV-22B Osprey completed a test flight outfitted with a titanium, 3-D printed link and fitting assembly for the engine nacelle. This link and fitting assembly is one of four that secure a V-22’s engine nacelle to the primary wing structure and will remain on the aircraft for continued evaluation. The flight was performed using the standard V-22 flight performance envelope. “The flight went great. I never would have known that we had anything different onboard,” said MV-22 Project Officer Maj. Travis Stephenson who piloted the flight. The metal link and fitting assembly for this test event were printed at Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey. Prior to this flight, multiple V-22 components built by Lakehurst and Penn State Applied Research Laboratory were tested at Patuxent River to validate performance. “The flight today is a great first step toward using AM wherever and whenever we need to. It will revolutionize how we repair our aircraft and develop and field new capabilities – AM is a game changer,” said Liz McMichael, AM Integrated Product Team lead. “In the last 18 months, we’ve started to crack the code on using AM safely. We’ll be working with V-22 to go from this first flight demonstration to a formal configuration change to use these parts on any V-22 aircraft.”

3dprinted part
The 3D printed part installed in the Osprey helicopter

Naval aviation has employed additive manufacturing as a prototyping tool since the early 1990s and in recent years has begun the process of printing non-flight critical parts and tools. Today’s demonstration is the first time a U.S. Navy aircraft flew with an AM part deemed essential to maintaining safe flight. Navy officials envision a future where all parts can be made on-demand globally by fleet maintainers and operators, and our industry partners – stocking digital data instead of ordering, stocking and shipping parts. Today’s flight is an important step toward achieving that vision. Including the V-22 link and fitting assembly, McMichael and her team have identified six additional safety-critical parts they plan to build and test over the next year for three U.S. Marine Corps rotorcraft platforms: the V-22, H-1 and CH-53K. Three of the parts will be made out of titanium, while the other three will be stainless steel. Even with the success of today’s flight, NAVAIR officials advise that there is a lot work to do before deployed aircraft are flying in theater with 3-D printed, safety-critical parts. “Our AM team has done some incredible work in a relatively short period of time – both internally through its production of aircraft components to be used in flight testing and externally through its liaison with industry and other government organizations,” said Vice Adm. Paul A. Grosklags, NAVAIR commander. “Although the flight today is a great step forward, we are not trying to ‘lead’ industry in our AM efforts, but it is absolutely critical that we understand what it takes to successfully manufacture and qualify AM parts for flight in naval aircraft, which we expect will largely be manufactured by our industry partners. Where I believe we can ‘lead’ industry is in the development of the AM “digital thread,” from initial design tools all the way to the flight line – securely maintained and managed through the life of an aircraft program.”

About 3D Printing Media Network

Check Also

map-3dhubs

Celebrate 3D Printing Day 2016 With 3D Hubs

3D Printing Day 2016 is here and it’s time for the biggest 3D print celebration …

Leave a Reply

Your email address will not be published. Required fields are marked *