Search Results

Search Results for""
CyBe
CyBe Construction offers new solutions and redefines the construction industry by developing, applying and offering mobile and modular 3D Concrete Printing techniques. This way of construction is much cheaper and faster than traditional methods while retaining the same high quality of the concrete. On our webpage you can get informed about various products that together offer solutions for free form design, increased sustainability and a reduction in complexity of the fragmented construction process. Besides, various projects in which these products are applied are shown. These possibilities solved known problems for architects, precast factories, contractors and other parties in the construction industry.
Read More
a8z6gac2
It was important for us to create a precedent, to show in practice that 3D construction technology is working, " says Alexander Maslov, general director of the AMT Group, managing the construction. - at that time to print the house - it was something from the realm of fantasy. We set the task to make it real. To paraphrase the words of the famous song, they took a fairy tale to make byl. Printing was done in the shop on the smallest printer. Printed the building in parts (the walls of the house, decorative elements, the tower), were taken to the construction site and collected as a designer. Since then, of course, the equipment has been improved: the speed of printing has improved, and the quality has improved. But even our first model showed itself as a reliable and efficient equipment . " For printing used construction printer S-6044, serially produced by AMT-SPETSAVIA. This model is a portal type with a working field of 3.5 x 3.6 x 1 m. The printer prints standard M-300 sand concrete, i.e. that can be purchased in almost any store building materials. Printing is done with layers 10 mm high and 30 to 50 mm wide. The speed of printing walls is up to 10 sq.m / h.
Read More
Orvetech
Sebastian Hilscher specializes in strategic cooperation and new developments. This creates synergies between products to bring unprecedented solutions to the market. An example is the balustrade construction modeled on noise protection wall construction.
Read More
3D Potter
3D Potterbot 7 is our professional dedicated ceramic and paste 3D printer. Built rugged and ready for production environment, universities, and ceramic institutes.
Read More
Cazza
Cazza provides 3D printing construction technology and services. We sell 3D printing technology that can be used to build a wide variety of buildings and structures. We also provide design, engineering and construction services to help you build your 3D printed dream home. Cazza provides the world’s next-generation large-scale 3D printing construction technologies and services to make construction faster, more cost-effective, and environmentally friendly.
Read More
obayashi
Obayashi pursues the potential for the future of the space elevator from a construction standpoint, and describes a newly-designed, whole-space elevator system, including its construction process, which we designed on the basis of work by construction engineers who completed the world's tallest free-standing tower, TOKYO SKYTREE®, in 2012.In the following animation, a space elevator which climbs from the Earth Port as a departure port for people to Geostationary Earth Orbit Station at a height of 36,000 km is featured.
Read More
specavia
Group of Companies SPETSAVIA is engaged in the manufacture of professional CNC equipment since 2009. In 2013, we drew attention to the growing interest of the market towards the topic of 3D construction printing. At the moment, the company specialists have developed and launched a series of portal construction 3D small and large format printers. Undoubted advantages of our equipment are: simplicity, reliability, maintainability, high resource, licensed software, included in the delivery of all models. The main consumers are small business and reinforced concrete products. Printers use for making small architectural forms for landscape design, making elements and parts of buildings and structures with subsequent assembly, printing buildings directly on the foundations. The activity of the company is focused exclusively on the production of equipment, but nevertheless specialists SPECAVIA in December 2015 built a house on additive technology (3D printing method) near Yaroslavl. Our portal construction printers have been used in the Urals, Siberia, Moscow, St. Petersburg, throughout Central Russia, Rostov-on-Don, Stavropol and Krasnodar, in the Crimea, Kazakhstan and Moldova.
Read More
doka-ventures
Doka Ventures deals with the future of construction. The construction sector has a great deal of ground to make up in terms of speed, productivity and value adding. In this context digitisation plays a major role as a possible solution. One of the biggest opportunities for this sector is understanding construction not as a project but as a cycle – from planning to bidding and erection, through commissioning and operations and on to rehabbing and ultimately demolition and the associated recycling processes. Not just as regards efficiency, sustainability and resource management, but also in terms of ensuring safety and quality. Doka Ventures contributes answers to burning economic, ecological and societal questions of our time. The company sees itself as a connecting link between new, pathbreaking technologies, methods and materials, and their implementability and viability against the backdrop of demographic and socio-political change.
Read More
apis-cor
With every year the population of earth is growing, more people try to get closer to big cities where the quality of life is higher. Just imagine, how many people will be in need of accommodation. Considering the rapid growth of city agglomerations there is a need to build fast and save natural resources, which is impossible without using new technologies.
Read More
Construction
Constructions-3D est un projet à impact social et collaboratif visant à fédérer les acteurs autour de la recherche d’un habitat nouveau pour l’Humanité
Read More
Passivdom 1
PassivDom is an Ukrainian technological startup “Passive House Ukraine”. We produce autonomous self-learning module houses made using 3D-Printing.PassivDom is the first totally autonomous house in the world that doesn’t need any fuel combustion even in Arctic climate conditions.The module uses only ecologically clean solar energy for all inhabitants’ needs: climate control (heating and cooling), water generation, air quality and oxygen control. The house itself produces electricity for all household appliances.
Read More
Xtreee Logo TEXT RGB for Word
XtreeE develops advanced large-scale 3D printing technology for the architectural design, engineering and construction sector.
Read More
txt_acciona_eng
Leaders in providing sustainable solutions for infrastructure and renewable energy projects across the world. Our offer covers the whole value chain, from design and construction to operation and maintenance. With a presence in more than 30 countries, the Group develops its business activities based on the desire to contribute to economic and social development in the communities in which it
Read More
Ai Build
Ai Build™ is a London based company that is focusing on improving the way we make and experience our built environment. With a team of uniquely experienced professionals, we are developing innovative products and technologies that push the boundaries of automation and human-space interaction.
Read More
SHINING 3D
SHINING 3D has been applying itself to 3D scanning and 3D printing technology for years, providing machinery and service in such sectors as industrial manufacturing, bio-medical, cultural creation, education. SHINING 3D was founded in 2004 and listed in the OTC stock market on August 8, 2014, becoming China’s first OTC stock in 3D digitizing and 3D printing industry. Shining3D’s headquarter is based in Hangzhou and it has branches offices in Shanghai, Beijing, Nanjing, Guangzhou, Chengdu, etc.
Read More
fouche
Fouche 3D Printing, Creator of the Cheetah 3D printer with a 1 cubic meter build volume.We know that we have a unique product. We hope and trust that it will provide jobs, change the way that products are manufactured- small batches that require less storeage, and that it will inspire creativity! ABS granules are used as the raw product for filament, therefore our cost per print is significantly lower. Our cost per kilo is less than $4/kg for ABS granules. As standard, we use a 3mm nozzle and get a 0.5 Kg\Hour flow rate. 1mm, 2mm, 4mm, 5 mm, and 6mm nozzles are also available.
Read More
BuzzLogo
"Hardware, software and methodologies to drive the next stage of the 3D printer revolution: (1) Home 3D printers that can produce sophisticated, working products. (2) Globally shippable and hence mass producible 3D printed buildings. ...many other innovations in the pipeline."Collaborations sought. Significant investor opportunities forthcoming. Patent pending + Fair Source.
Read More
imgres
WASP (World Advanced Saving Project) is an Italian company specializing in the production of Delta type FDM 3D Printers. The company stands out for the vision of its founder Massimo Moretti, whose dream is to be able to develop a 3D printer capable of printing houses in an completely eco-fiendly way to help solve some of the worlds housing issues. Through the sale of its first 3D printer, the PowerWASP, WASP was able to develop a prototype for a 3D printer capable of printing with a particular type of clay material suitable - if the technology were to be sufficiently scaled up, for making habitable houses.
Read More
D-Shape.png
D-Shape is a new robotic building system using new materials to create superior stone-like structures. This new machinery enables full-size sandstone buildings to be made without human intervention, using a stereolithography 3D printing process that requires only sand and our special inorganic binder to operate.D-Shape is a new building technology which will revolutionize the way architectural design is planned, and building constructions are executed
Read More
betabram
Slovenian company, launched the BetAbram house 3D printer in 2013. The three models available, P1, P2, P3, can be delivered within two month of ordering and finalizing payment. The larges model, P1, can 3D print parts as long a 6 meters and weights 250 kg.
Read More

This information will not be shared with third parties