The MIT Computer Science and Artificial Intelligence Laboratory – known as CSAIL – is the largest research laboratory at MIT and one of the world’s most important centers of information technology research.
CSAIL has played a key role in the computer revolution and developments such as time-sharing, massive parallel computers, public key encryption, mass commercialization of robots, and much of the technology underlying the ARPANet, Internet and the World Wide Web. CSAIL’s focus is developing the architecture and innovative applications for tomorrow’s information technology.
University of Pécs PTE 3D Project as a highlighted regional strategic policy, was born in the summer of 2014 with the proposal of the Rector.
The 3D printing and visualization technology may appear in the University’s portfolio (as part of the Entrepreneur University project) not only as a significant Research, Development and Innovation pursuit, but a compelling service as well.
Oak Ridge National Laboratory is managed by UT-Battelle for the U.S. Department of Energy. ORNL is DOE's largest science and energy laboratory, conducting basic and applied research to deliver transformative solutions to compelling problems in energy and security.
The Pennsylvania State University along with its partners Battelle Memorial Institute and 3D Systems operate the Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D) as a world-class resource for advancing and deploying additive manufacturing (AM) technology for critical applications. With a broad mission to advance and deploy AM technology of metallic and advanced material systems to industry, CIMP-3D seeks to:advance enabling technologies required to successfully implement AM technology for critical components and structures,
provide technical assistance to industry through selection, demonstration, and validation of AM technology as an "honest broker", and
promote the potential of AM technology through training, education and dissemination of information.
The AMPrint Center is generously supported through a Center for Advanced Technology (CAT) grant from the New York State Foundation for Science,Technology and Innovation. Additional funding from industry and federal government partnerships support the Center's applied R&D mission. Interested in learning more? Feel free to contact Dr. Denis Cormier the AMPrint Center Director, or Dr. Bruce Kahn, Chief Scientist and Director of Business Development to discuss the Center's activities as well as mechanisms for collaboration.
Our design courses were created with the beginner in mind. We do not overwhelm you with 'just in case' information but rather teach you the tools and techniques you need at the moment you need them. Every design we model has a practical use and is designed with the intent that it will be 3D printed. Therefore, you not only learn to design with Fusion 360 but also learn to design for 3D printing. By the end of the first course you will have the skills and confidence to begin creating your own designs and start turning your ideas into physical objects. Once enrolled in any of the courses, you get lifetime access to the content so that you can view as many times as needed. All of our courses come with a 30 day money back guarantee so feel free to try at no risk.
3Dexter is the leading EduTech company in the Indian subcontinent providing Experiential Learning processes at the grass root level through 3D Printing Technology. Flagship product is a curriculum in 3D Printing that imparts 3D Printing and Designing skills with proper integration of the subjects being taught to students.
3Dexter's vision is to harness innovation in young minds and establish Mini Factories in Educational Institutions where students follow the Design Thinking approach to
Visualise-Design-Create. 3Dexter trainings are executed by company certified specialist trainers.
The main Virginia Tech campus is located in Blacksburg, VA, about 40 miles southwest of Roanoke, VA. Use 965 Prices Fork Road or the intersection of University City Boulevard and Prices Fork Road, Blacksburg, VA 24060 as a destination for online routing and mapping software and GPS devices. This is the location of the Visitor and Undergraduate Admissions Center.
The National Space Society’s Enterprise In Space (EIS) is the world’s first NewSpace education program. Non-profit organization formed to send an 8 foot orbiter into space, as a science and space education project for all ages and as a tribute to the visionaries of science and science fiction.
Rippl3D challenges are designed to engage students in fun and meaningful design and problem solving experiences. Working with our Partners we are continually developing a growing variety of challenges that leverage STEM resources like 3D printers and our partners STEM Kits. Challenges can be adjusted in complexity to address audiences from K to Grey.
The Centre for Advanced Additive Manufacturing (AdAM) at The University of Sheffield conducts world leading research in the fast emerging field of Additive Manufacturing (aka 3D Printing). Our activities are led by a team of internationally respected academics backed up by high performing and dedicated researchers and technicians. Much of our research is published in high quality journals and is also valued by industry across many sectors including aerospace, medical devices, automotive, consumer products etc. Our labs are home to world class manufacturing and testing facilities; in order facilitate an open approach to collaborative research that enriches our activities our facilities are located in a variety of labs, each with complementary equipment and expertise that help to push the boundaries of the technology forward
Technology Research Association Next Generation 3D Research Association for Future Additive Manufacturing (TRAFAM) is a high-quality, high-mix variety of small quantities, which enables our manufacturing industry to maintain sustainable and developmental competitiveness in the global market It is an organization aiming to create a new manufacturing industry in Japan by constructing world-class next-generation industrial 3D printers and ultra precision 3D modeling systems suitable for manufacturing added value products and parts.
Our goal, at the Southeastern Institute of Manufacturing Technology is to be a resource for manufacturing and technology firms that have chosen to do business in South Carolina. Each of us is ready to assist you in finding more efficient and affordable methods for accomplishing your goals.
At GE, we’re passionate about the transformative power of advanced manufacturing. In the past few years, we have built a tremendous network of teams and sites that are advancing additive manufacturing every day. And as a notable user of additive technologies, we recognize the value and potential it brings to modern design and manufacturing challenges.
The DMRC is an institution in the faculty of mechanical engineering at the University of Paderborn. Its structure is flexible and very interdisciplinary; depending on the currently handled research topics, the constellation of chairs participating in the DMRC can be changed. At time, within the DMRC 9 different chairs with 11 professors and a large number of researchers work together. The DMRC’s projects are (co-)funded by the State Government of North Rhine-Westphalia (NRW), by the industrial partners and by public sources.
+LAB is the 3D Printing Lab of Politecnico di Milano and it is located in "Giulio Natta" building, together with Chemical and Materials Engineering Department.
The laboratory is active since November 2013 when Marinella Levi and her collaborators started to employ engineers, designers, researchers and makers, to obtain a multidisciplinary approach to 3D printing in which teaching, research and design can melt together to develop towards material and technology innovation.
New fields of application are being studied at +LAB, paying special attention to social and environmental implications.+LAB is naturally inclined to change and innovation, and this is why we put such effort in keeping up to date with the fast technology development that 3D printing is experiencing in these years.
AMBER (Advanced Materials and BioEngineering Research) is a Science Foundation Ireland funded centre that provides a partnership between leading researchers in materials science and industry. Materials science has been described as the science of stuff! We are researching materials that will transform everyday products of the future, from mobile phones to knee implants, batteries to beer bottles. AMBER links industry to research programmes and the aim of the centre is to develop products that directly impact everyone’s quality of life such as the development of the next generation computer chips and new medical implants and pharmaceuticals that will improve patient care.AMBER is jointly hosted in Trinity College Dublin by CRANN and the Trinity Centre for Bioengineering, in collaboration with University College Cork and the Royal College of Surgeons in Ireland. AMBER brings together Ireland’s leading material science researchers working across the disciplines of Physics, Chemistry, Bioengineering and Medicine; with an international network of collaborators and companies.