Home / 3D Printing Processes / Experts Discuss Digital Fabrication in 1:1 Scale Architecture at AAAS 2017 Meeting

Experts Discuss Digital Fabrication in 1:1 Scale Architecture at AAAS 2017 Meeting

During the AAAS 2017 Annual Meeting in Boston, Jonas Buchli, ETH Zurich — The Swiss Federal Institute of Technology in Zurich, Switzerland, Ronald Rael, University of California, Berkeley and Emerging Objects, U.S.A., and Jane Burry, RMIT University, Melbourne, Australia discussed the latest developments in digital fabrication in architecture at 1:1 building scale. As ScienceDaily reports, these global experts showed that digital technologies can be successfully integrated in design, planning, and building processes in order to successfully transform the building industry.

On Site Digital Fabrication for Architecture

Jonas Buchli, Assistant Professor for Agile and Dexterous Robotics at ETH Zurich in Switzerland and principal investigator in the Swiss National Centre of Competence in Research (NCCR) Digital Fabrication proposed a radical focus on domain specific robotic technology enabling the use of digital fabrication directly on construction sites and in large scale prefabrication. He demonstrated how researchers at ETH Zurich within the NCCR Digital Fabrication — Switzerland’s leading initiative for the development and integration of digital technologies within the field of architecture — are facing the challenge of developing this technology. They bring a comprehensive and interdisciplinary approach that incorporates researchers from architecture, materials science, and robotics. In his presentation, Buchli will provide insight into current research and the future vision and development of the In situ Fabricator, a mobile and versatile construction robot, which in 2017 will be utilized for the first time on an actual building site.

The New Mathematics of Making

Digital computation has freed designers from the constraints of the static 2- and 3- dimensional representational techniques of drawing and physical modeling. Design attributes can be directly linked to extraneous factors: structural or environmental optimization, or fabrication and material constraints. Mathematical design models contain sufficient information even for computer numerical controlled (CNC) fabrication machines and techniques. Jane Burry, Director of the Spatial Information Architecture Laboratory at RMIT University in Melbourne, Australia, explored how these opportunities for automation, optimization, variation, mass-customization, and quality control can be fully realized in the built environment within full scale construction. Burry shows select digital fabrication examples, where research and innovation have changed construction practice. She will draw on prominent case studies such as the design and construction of Antonio Gaudí’s Sagrada Familia.

Building Materials for 3D Printing

Ronald Rael

Most materials currently used in 3D printing, were developed to print small scale objects. Ronald Rael, Associate Professor for Architecture at University of California, Berkeley and founder of 3D printed construction pioneering studio Emerging Objects, revealed how he is developing new materials that can overcome the challenges of scale and costs of 3D printing on 1:1 construction scale. He demonstrates that viable solutions for 3D printing in architecture involve a material supply from sustainable resources, culled from waste streams or consideration of the efficiency of a building product’s digital materiality. The methods of such architectural additive manufacturing must emerge from interdisciplinary research.

About 3D Printing Media Network

Check Also

voxeljet Down 18.2% in Q2, Optimistic on New HSS Systems and Service Revenues

Some might have missed it but voxeljet is moving fast on its 3D printing capabilities …