Home / Automotive / Local Motors Prepares for Serial Production of Its OLLI 3D Printed Smart Vehicles

Local Motors Prepares for Serial Production of Its OLLI 3D Printed Smart Vehicles

Marketing Director Carlo Iacovini Anticipates the Company’s Strategy for European Expansion of its OLLI 3D Printed Autonomous Vehicle Fleet

Local Motors surprised the world when it presented the first vehicle with a fully 3D printed body and it shocked the world showing that this was not just a marketing stunt but the beginning of a radical change in the way vehicles are manufactured. The company’s unique approaches in terms of collaborative, smart (and eventually distributed) manufacturing of smart vehicles are all coming together in the OLLI projects, the company’s first autonomous vehicle which will be produced in two versions: serially manufactured car with printed parts or fully customizable and fully 3D printed.

His experience at CRP Group, the leading 3D printing service and composite SLS material manufacturer that also produced Energica (the first commercially available electric superbike), made Carlo Iacovini the ideal figure to support Local Motors expansion in Europe. The project Carlo Iacovini is working on is very far reaching. He discussed some of the main aspects which will be presented in detail and shared at the upcoming IN(3D)USTRY congress in an effort to move AM adoption forward in the automotive segment.

Local Motors arrived in Europe about two years ago, with the goal to have products that would be available on the European market,” Iacovini explains. “The Strati and RallyFighter, however, were not ideal for European regulations. The OLLI project – he continues – was born from a challenge which asked the Local Motors community to envision the future of mobility in Berlin: an autonomous, electric vehicle that could carry up to 12 people (8 plus the backup driver in Europe) and could be summoned on-demand through an app like Uber.

This challenge led to the first two prototypes: one built in the US and one built in Europe, which also evolved into two separate research groups. The European prototype is housed at the Euref Campus, a scientific research center focusing on mobility. The campus also hosts INNOZ, which is the Deutsche Bahn division for all that concerns mobility innovation and experimentation.

Last November we launched a pilot project at Euref, together with the German Ministry of Transports – says Iacovini. The project sees our OLLI drive autonomously through the campus carrying workers, guests, visitors and also gathering tons of information and data for further development. In the meantime the market began to take form…

Today the demand for projects based on autonomous vehicles in the USA, Europe, Australia and the Middle East is huge. Not just for long distances and private cars but for last mile connections and transportation within private structures such as universities, shopping centers or airports.

OLLI has thus become the highest priority project at Local Motors and it is shaping the manufacturing research behind it,” Iacovini says. “It needs to be industrialized and validated for production as a commercial unit. This means it has to satisfy all automotive requirements and the highest levels for autonomous drive.”

Local Motors is facing huge demand. The first ten units will be considered as beta versions that can be progressively upgraded in terms of software and even – through 3D printing – hardware. Today OLLI already has a high number of final components which are 3D printed using Cincinnati Incoroprated’s unique BAAM technology. These are parts made in composite carbon fiber in an ABS matrix. The BAAM system can produce very large parts very quickly, melting pellets of material instead of filaments to further cut costs.

These parts include the wheel covers, several interior components including the seats, and many parts of the internal structure. Where necessary the parts as subsequently finished and covered with materials to improve aesthetics and comfort. Local Motors recently completed a new version of the OLLI which is almost entirely 3D printed.

Our goal at Local Motors is to combine OLLI’s development with mobility innovation,” Iacovini explains. “We now have ha product that can meet all mobility requirements. So we are going to develop that vehicle all types of services but at the same time we are also going to use it to progress automotive manufacturing technology and processes, which means extensive development in terms of adopting 3D printing.”

This will lead to the two different OLLI versions: an industrialized model which will be more accessible and will be available in higher production numbers and the fully customizable versions which will be more expensive and largely 3D printed on demand. In order to make this happen Local Motors – which is still  a relatively small startup – is going to collaborate and share ideas with the entire automotive industry, which is exactly what the company expects to find at IN(3D)USTRY.

We don’t want to just test 3D printing and use it for prototyping. We want to fully integrate it into our production process for final parts. We want to share our findings with other automotive manufacturers and also work with them on the development of new materials, applications and solutions.”

So far Local Motors has always proved skeptics wrong. The company’s show at IN(3D)USTRY next October will certainly not disappoint.

About Davide Sher

Over the last decade Davide has built up extensive experience as both a technology journalist and communications consultant. Born in Milan, Italy, he spent 12 years in the United States, where he received his undergraduate degree from SUNY Stony Brook. He is a senior analyst for US-based firm SmarTech Publishing focusing on the additive manufacturing industry. He founded London-based 3D Printing Business Media Ltd. which specialises in media and communications services for the 3DP and AM industry, through which he runs 3D Printing Business Directory, the largest global directory of companies related to 3DP, as well as two editorial websites, 3D Printing Media Network and Il Replicatore.

Check Also

PyroGenesis’ New Plasma Process Produces Ultra Fine MIM Cut Powders for Metal Binder Jetting

PyroGenesis Canada, a high tech company that designs, develops, manufactures and commercializes plasma waste-to-energy systems …

Leave a Reply

Your email address will not be published.