Home / 3D Printing Processes / Metal 3D Printing is Big and Getting Bigger, Here’s Why in 5 Points

Metal 3D Printing is Big and Getting Bigger, Here’s Why in 5 Points

People ask if and when 3D printing will become a method of mass production. As far as plastics go, I don’t know. For metals, though, it is a whole different story: it is already happening. Metal 3D printing technologies are evolving at breakneck speed, constantly increasing their size and velocity capabilities. One of the reasons for this, in my opinion, is the intense competition, both between different technologies and different approaches to the same technology. This is not, however, the only reason.

xline-2000r-1024x779TOUGH COMPETITION

The primary industrial metal 3D printing technology today is powder bed fusion. There are eight (and a half) players currently on the market offering this technology and one (and a half) that is entering it now. That makes 10 players all together. The “half” is German metal manufacturing giant Trumpf, which has entered the market in a joint venture with Italy’s Sisma. These two companies join four more German companies: two are the market leaders EOS and Concept Laser, followed by SLM Solutions and the smaller Realizer.

In the UK, the manufacturing giant Renishaw offers a range of very specific SLM 3D printers. There is one company in the US, 3D Systems, which offers metal 3D printers through its acquisition of France’s Phenix. The new player that just entered the market is Additive Industries from The Netherlands. And there is one company that has taken a different approach: Sweden’s Arcam Metals, with its unique Electron Beam Melting technology. This means that all these companies from some of the world’s most industrialised nations, are competing to offer better and more automated machines and the amazing part is that they still can meet demand. One more player, Aero Sud in South Africa, will soon be entering the market with the biggest metal powder bed fusion 3D printer ever built.

The quality of an XJet 3D printed part by Nanoparticle Metal Jetting
The quality of an XJet 3D printed part by Nanoparticle Metal Jetting

MORE TECHNOLOGIES

On top of this, there are other technological approaches that are pressing on. For example, the binder jetting technology proposed by ExOne and Digital Metals. Although binder jetting needs post processing, the technology can do things that powder bed fusion cannot. In the case of Digital Metals, it can create microscopic details and some of the thinnest walls possible with metal. In the case of ExOne, it can create some seriously large parts at affordable costs, as in the recent partnership with Powder Manufacturer Puris. It doesn’t end here, because Israel-based XJet is about to launch a machine capable of inkjetting nano metal particles. This will open yet unseen possibilities for thin walls, high detail, smooth finish, and fully dense parts that may even be made up of multiple materials in the future.

3D printed metal serial production is now implemented in aerospace and defence, soon in automotive as well
3D printed metal serial production is now implemented in aerospace and defence, soon in automotive as well

BIGGER INDUSTRIES

However, all this would not matter if there was no big demand, as industry pioneers know full well. That demand now exists because the aerospace industry is ready to implement it now and the automotive industry will be in a couple of years. Not for prototyping, but for actual production, and the reason is that the additive parts made in metal have comparable properties to the parts manufactured traditionally, while adding all of the new geometrical possibilities. In the aerospace industry, the use of topological optimisation and generative design is soon going to be a must in order to meet the environmental requirements of tomorrow. Even without the high demand from the defence industry, AM adoption is booming.

DED and other metal deposition additive technologies can produce parts fast
DED and other metal deposition additive technologies can produce parts fast

LARGER DEPOSITIONS

One other technology that can be considered additive manufacturing is also booming: we are talking about Directed Energy Deposition (Aka laser cladding). It is a type of metal deposition, so it does have some geometrical limitations, however it can deposit very large amounts of materials in a short time, which means that it is fast. Furthermore, it can be integrated into multi-tool robotic systems. Giants such as DMG Mori and Trumpf, whose yearly revenue almost equal those of the entire 3D printing industry combined, are starting to seriously push this metal powder based technology. Then, of course, there are also smaller companies that are making big moves, such as Sciaky. The US company’s unique EBAM technology – which is a type of DED only it melts a metal filament with an electron beam instead of powder with a laser – is already being used in the US aerospace and defense industries for very large size parts.

The factory of the future is modular, additive, digital and fully automated
The factory of the future is modular, additive, digital and fully automated

DIGITAL, ADDITIVE FACTORIES 

While the consolidated (and gigantic) machine tools industry has focused on a completely automated process that produces a final part through more robotic instruments (including additive manufacturing, through laser deposition), the largest metal 3D printer manufacturers (Concept Laser, EOS , SLM Solutions and Additive Industries in particular) are working to automate the production process more and more, ensuring that print times become a relative concept. This is also finalized at the production of serial quantities of pieces, only that each one of these pieces will be controlled digitally bit by bit, pixel by pixel, voxel by voxel and unit by unit. As explained by Airbus’ Peter Sander, if indeed we will start 3D printing tons of metallic powders, automation will be necessary. It remains only to see who will provide all of these powders.

About 3D Printing Media Network

3D Printing Media Network is the editorial branch of 3D Printing Business Directory. It was set up to provide the latest industry news and opinions to a global audience of professionals.

Check Also

ATO One

3DLab to Launch ATO One Metal AM Powder Atomizer for the Office

Polish company 3DLab is introducing ATO One, the world’s first atomizer designed with office space …