Home / 3D Printer Hardware / Prodways Introduces New Robotic Metal Deposition RAF Technology for Large Parts

Prodways Introduces New Robotic Metal Deposition RAF Technology for Large Parts

On the eve of Le Bourget Paris Air Show, Prodways Group, a subsidiary of Groupe Gorgé, presents its new RAF Technology (Rapid Additive Forging) for the 3D metal printing of large titanium parts.

Production of large metal parts for critical applications, in particular titanium parts for the aeronautical sector, relies on expensive and slow manufacturing processes often using combinations of forging and machining techniques. Certain titanium parts have manufacturing lead times of more than 12 months, with significant waste of metal material in the process.

Prodways Group’s Rapid Additive Forging technology is a type of DED (directed energy deposition), a family of technology broadly known as “powder fed” since they us a blown powder deposition head rather than a powder bed like selective laser melting processes. According to the company it will use a robotic arm to deposit the powder, which should offer more geometric freedom than other currently available technologies.

It was built on a continuous R&D effort and a strengthening of its 3D metal printing offering. The 3D printer developed uses a robot equipped with a head depositing molten metal in an atmosphere of inert gas. Accordingly, the metal is deposited layer-by-layer and the large part is completed within a few hours. This innovative technology quickly manufactures titanium blanks with very similar geometry compared with the final part. These blanks are then finish-machined, thus avoiding considerable losses of material which can represent up to 95% of the metal block with traditional machining processes.

The RAF Technology was developed in collaboration with Commercy Robotique, a subsidiary of Groupe Gorgé specialised in robotised welding for more than 40 years. A patent application was filed by Prodways Group.

This process has been tested on various metals. In particular, it is used to print titanium, a metal seeing increased use in new-generation aircraft. The third generation of the prototype is able to produce parts of more than 70 centimetres in size. Prodways Group is currently developing a version which would print parts of up to 2 metres in the main dimension.

With respect to other comparable technologies developed by market players, the Prodways Group’s Rapid Additive Forging technology uses a distinctive metal deposition technology focusing on the metallurgical quality and the repeatability of the process. The first metallurgical tests conducted on different parts revealed an absence of porosity and greater mechanical resistance compared with usual 3D metal printing techniques using laser or electron beam sintering.

Several operators in the aeronautical industry believe this technology family could be applied to nearly 50% of the titanium parts used to manufacture an aircraft and generate savings of up to 50% on the cost of parts. Prodways Group will regularly provide updates on developments in this technology, which has already attracted the interest of leading industrial groups.

About 3D Printing Media Network

Check Also

Additively Manufactured Optical Ice Detector by GKN Aces In-Flight Test

GKN Aerospace has successfully flown an enhanced ice protection system (IPS) that allows for a …

Leave a Reply

Your email address will not be published. Required fields are marked *